Nano microporous aeration pipe is a self-made micron microporous aeration pipe formed at one time by using the synthesis technology of polymer raw material activated carbon and rubber, long-acting antibacterial agent and hydrophobic preservative. It has the characteristics of microporous self closing, anti blocking, anti-corrosion, anti-aging aeration, micro dissolved oxygen, high ventilation performance, power saving and so on; It is widely used in the fields of aquaculture bottom microporous aeration and aquaculture static oxygenation;

Brief introduction of energy-saving microporous aeration bottom oxygenation Technology: microporous aeration bottom oxygenation technology is to use the air flow generated by low-noise and energy-saving roots blower to reach the microporous aeration pipe or microporous aeration disk at the bottom of the water body through the linked main and branch pipes to generate atomized bubble flow. With the rise of micro bubbles, oxygen is gradually released into the water body, so as to achieve the purpose of water body oxygenation. A low-noise and energy-saving microporous aeration bottom oxygenation system is made by organically combining polymer microporous aeration pipe with high-performance low-noise and energy-saving roots blower.

Features of low noise and energy-saving microporous aeration bottom oxygenation complete equipment:

The low-noise and energy-saving roots blower compresses the air to the microporous aeration pipe distributed near the bottom of the pond, so as to achieve the effect of three-dimensional oxygenation of the pond from the bottom. Compared with the traditional surface mechanical oxygenation, it has the advantages of uniform oxygenation area, balanced oxygenation level, less mechanical energy consumption, obvious effect of improving underwater environment and so on:

1. During oxygenation, a V-shaped or vortex bubble is formed at the bottom of the water. The water depth is about 2m-5m, and the effective oxygenation area of an 80cm diameter aerator can reach 350m ²， Its bubble diameter is 3.5 µ m, and its large contact area with water can make the dissolved oxygen at the bottom of the pond at 6-8mg/l, accelerate the oxidation of ammonia nitrogen, nitrite, hydrogen sulfide and other harmful substances at the bottom of the water body, degrade the toxic and side effects of aquatic organisms, improve the living environment of aquatic products, and achieve the effect of regulating water quality.

2. Compared with the traditional oxygenation method, the low-noise and energy-saving microporous aeration bottom oxygenation system belongs to the bottom static oxygenation, low noise, no vibration, and has the least impact on the normal life of the breeding products. Therefore, it can increase the adaptability of the breeding products, increase appetite, shorten the breeding growth cycle, and the stocking density can reach about 1.5 times of the original. It can improve the quality while increasing the output, and achieve the best economic benefits.

3. Compared with traditional oxygenation, it can save 60% - 80% of power consumption.

4. High safety.

5. Effectively reduce the temperature difference between the upper and lower layers of aquaculture water, and enhance the upper and lower exchange function of water.

features:

(1) Effectively save energy consumption by 75%

(2) Improve the growth rate of fish and shrimp

(3) Maintain the oxygen level in the water

(4) Reduce harmful gases in water

Welcome to contact:+8618013418091(Whatsapp/Wechat)

                                             +8618013418097(Whatsapp/Wechat)